Switching over from air conditioning to heat when the time of year is right can be quite a simple task overall. Homeowners will need to ensure this process is done properly and efficiently, however. Use the step-by-step guide below to properly switch your unit over to heat.
How To Prepare For Switching From Air Conditioning To Heat
It is essential to perform a proper seasonal shutdown on your AC unit as soon as the temperatures cool down. This process includes taking measures like cleaning the coils, drainage, and covering the unit for the upcoming colder months.
Switching From Air Conditioning To Heat
Use the following steps to properly switch from AC to heat:
- Adjust your thermostat to the desired temperature.
- Switch the settings from “COOL” to “HEAT”.
- You should hear the AC fan turn off.
- A second click as the furnace ignites should also be heard, at this time.
- Give the unit about 30 seconds as gas flows into the heater.
If the unit keeps shutting down after this step, it’s typically because the furnace sensor cannot detect the flame.
- Make sure your gas valve is open and delivering gas to the AC unit.
- Next, also check to see if the thermocouple (flame rod) is completely clean.
- It is possible for this component to have collected dust over the past few months.
- Sandpaper can be used to clean the thermocouple if it looks dirty.
- Keep your windows open during this process to offer sufficient ventilation.
SHIELD’S ELECTRIC IN TEMPE, ARIZONA
Family owned and operated since 1957, Shields Electric, Inc. is one of Arizona’s most experienced electrical contractors. Our commercial, residential and institutional clients benefit from our decades of experience in a wide range of market segments and project types throughout the state of Arizona. Contact us today for a free quote!
